Home > News > Content

Ierda Industry (Ningbo) Co,.Ltd

Contact: Mr. Xie

Tel: 86-574-62135828

Fax: 86-574-62135827

Phone: 86-13957472920 

E-mail: Sales@ierda.com

Basket Strainer Pressure Loss Is Small And Easy To Clean
Jul 10, 2017

The Basket Strainer is used to remove solid impurities from the fluid. In the chemical plant on many machines, there are Basket Strainers of the figure. Before the oil enters the machine, it is necessary to set the Basket Strainer before the fuel oil enters the nozzle and before the feed oil or seal oil enters the pump, before the steam condensate enters the trap.

Net Basket Strainer using the Basket Strainer directly to intercept water, oil and other liquid impurities, remove water, oil in the suspended solids, particulate matter, reduce turbidity, water purification and oil quality.

The Basket Strainer accuracy of this Basket Strainer is related to the mesh size and number of layers of the screen. General flow is relatively large, the pressure loss is small, easy to clean, but the Basket Strainer accuracy is not high, can be used for pump suction port, are coarse Basket Strainer.

The Basket Strainer element of the wire gap Basket Strainer is a Basket Strainer element which is tightly wound around the cylindrical skeleton with copper wire or aluminum wire. The oil passes through the pores between the wires and enters the inside and flows out of the upper channel. Device structure is simple, large flux, especially for the requirements of non-stop fine Basket Strainer oil occasions, and more for oil return Basket Strainer. But the structure of the Basket Strainer is more complex, manufacturing precision requirements are higher, and the Basket Strainer material strength is low, easy to clean.

The Basket Strainer with metal powder (stainless steel, pure nickel, pure iron) sintered into porous materials for the Basket Strainer element, can withstand high pressure, high filtration accuracy, belonging to the depth of the Basket Strainer. The disadvantage is that particles are easy to fall off, blocked, easy to clean.

At present, mainly for the thermal oil Basket Strainer, the heat transfer oil can be generated in the heat process of a small amount, but with the general Basket Strainer Basket Strainer can not afford the polymer and coke (grain) Basket Strainer to reduce the heat transfer oil in Heat conduction process of thermal resistance, improve the heat transfer effect. This type of Basket Strainer can be applied to a variety of grades of transformer oil filtration and gas and liquid filtration, purification, separation and other processes.

Paper Basket Strainer, also known as paper core Basket Strainer to deal with the Basket Strainer paper as a Basket Strainer material. In order to increase the filtration area, the core is often made of folding. This Basket Strainer is reliable, high filtration accuracy, but the paper can not be cleaned after plugging, must be replaced, usually used for fine filtration.

Basket Strainer Strainer because of its Basket Strainer and the valve body to form an acute angle, looks like a "Y" word, so called the Basket Strainer Strainer.

Basket Strainer Strainer at the end of water and other liquid through, one end of the precipitation of waste, impurities, its role is to remove impurities in the water, to protect the normal operation of the valve and the role of equipment.

The water to be treated by the Basket Strainer enters the body from the inlet, and the impurities in the water are deposited on the stainless steel screen, resulting in a pressure differential. Through the differential pressure switch to monitor the inlet and outlet pressure changes, when the pressure reaches the set value, the electronic control to the hydraulic control valve, drive the motor signal, causing the following actions: the motor drive brush rotation, the Basket Strainer to clean, while the control valve open The entire cleaning process only lasts for several tens of seconds, when the cleaning is over, close the control valve, the motor stops rotating, the system returns to its initial state, began to enter the next filtration process.

Basket Strainer Strainer structure is simple and inexpensive, widely used in the market. But its Basket Strainer is made of very thin stainless steel punching plate or made of woven mesh, so the service life is low. In the cleaning, the need to open the back cover for sewage, remove the cartridge cleaning.

The Basket Strainer is a small device that removes a small amount of solid particles in the liquid to protect the equipment from normal operation. When the fluid enters the Basket Strainer cartridge with a certain size of the Basket Strainer, the impurities are blocked and the clean filtrate is discharged from the Basket Strainer outlet, When the need for cleaning, as long as the removable cartridge removed, after processing can be reloaded.